'Limberollers' - The Flexible Alternative
The 'Limberoller' flexible conveyor belt roller is loaded
with features including:
- Resistant - The Limberoller accepts
high impact loading by the soft rubber discs and the inherent
flexibility of the idler itself. The addition of soft rubber
blocks at each end can assist where extreme conditions
prevail.
- Eliminate Material Build Up - The flexibility
of the discs together with the continual flexing action
of the wire rope, prevents material adhering and building
up on the discs. Freedom from material build up avoids
damage and prolongs belt life.
- Save idlers used - On average, only
two Limberollers are used on every ten feet of belting-
a significant saving over other idlers!
- Centre Belt Automatically - A belt
supported by conventional three or five roll idlers will
not correct even slightly off-centre loading. The Limberoller
centres the load automatically, as the bottom troughing
point is on the same vertical plane as the gravity centre
of the load.
- Belt Return Tracking - The Limberoller's
natural troughing helps track the belt on its return run.
Limberollers can be used on either the top or return run
of the installation.
- Deep Trough Loading - A Limberoller installed at a 45 ° troughing
angle at the loading area avoids the necessity for skirt
boards. This also eliminates belt wear due to top cover
cuts. Limberollers also require less space between the
drum and first full trough idler than conventional steel
idlers.
- Quick Installation and Removal - Conventional
idler removal is often made difficult, if not impossible,
by problems with corrosion and spillage. Not so with the
Limberoller! Installation and removal is fast due to the
unique hooks at each end of the Limberoller idler.
'NoMove' Conveyor Belt Alignment Discs
By
installing NoMo discs on the last return before
the tail end, the belt is centralised, enabling it to pick up the
product without spillage!
- Easy to Install
- No More Spillage
- No More Damage
The performance can be enhanced even further by installing another pair of NoMo discs on the firsts set of roughing rollers from the feedhopper. NoMo discs can be installed on all parts of the conveyor system to assist belt alignment.
Hoverdale has a wide selection of products available to help solve your problems. Our customers span the world and represent a wide range of industries from steelmaking, mining and extractive industries to the food industry. We aim to provide top quality products in a professional and expedient manner... with a level of service that is unsurpassed.
