Hoverdale can fabricate any size cutting edge for your bucket. We offer straight, spade nose, duck bill, bolt-on, and slip-on cutting edges. We can
also provide skid plates cut to size, per your requirements. Hoverdale Cutting Edges are available in 360, 500, 450 and 500 Briness hardness. Low hydrogen electrodes- such as AWS Spec E-70XX, E-80XX, E-90XX and E-100XX are
recommended. Pre-heating and post-heating are also recommended on thicker edges. Standard bevel 30
To place an order for Cutting Edges or any other Special Steel Product, e-mail us directly at Steels@Hoverdale.com or contact us using the details below. We are only a phone call or e-mail away...
A |
B |
C |
D |
E |
F |
8" |
51/4" |
3/4" |
11/2" |
1/2" |
3/16" |
A |
B |
C |
D |
E |
F |
10" |
63/16" |
11/8" |
21/4" |
11/8" |
7/16" |
S-815
S-1025
Bucket liner
and Spade Nose Cutting Edge
WELDING PROCEDURE
1) Use low hydrogen welding rod (7018)
2) Tack weld from centre to outer edge
3) Pre-heat to 200-250°F
Cutting Edges available up to 3" thickness. Custom bolt on edges are also available. When ordering a duck bill or spade nose cuttinmg edge, please indicate if offal is desired.
SLIP-ON CUTTING EDGES
Heat treated steel with typical hardness of 450 BHN. Extends bucket life. Easy
to weld onto bucket. Extends life of general purpose edge. Less downtime for replacemen. Takes more abuse and wear with less weight.
 |
 |
 |
 |
 |
Unit 3, Enderby Road Industrial Estate, Whetstone, Leicester LE8 6HZ, England
tel. (44) 116 275-2017 fax. (44) 116 284-9048
 |
 |
 |
 |
 |
 |
 |
 |
