Mechanical Splices? No Problem.

The Razor-Back® belt cleaner features tough self-adjusting replaceable tungsten carbide blades (non-carbide also available) for extremely effective conveyor belt cleaning.

Razor-Back® Belt Cleaner Features & Benefits

• Longwearing Abrasion Resistant Blades – available with
  replaceable V-Tips for vulcanized conveyor belts or C-Tips or
  F-Tips for conveyor belts with mechanical fasteners. Also available
  with Urethane and AR™ 400 blades.
• Impact Absorbing Tension Cushions – each individual blade
  to the belt for a controlled and effective belt cleaning across
  the entire width of the belt.
• Compact Design – allows for an installation that requires less
  then 9” of clearance to be installed and maintained.
• Mechanical Splices? No Problem – The Razor-Back® can
  be installed on belts with mechanical splices, due to the laid-back
  wiping blade angle and impact- absorbing tensioning cushions,
  allowing the mechanical splices to pass without damaging the
  belt cleaner or the splice.
• Blade Cartridge – allows for easy change out of scraper blades
  from either side of the conveyor
• Available Tensioning Systems – Bolt-Up™, Duo-Spring™,
  or Spring-Shoc™
• Available Optional Spray-Bar – Spray nozzle sizes can be
  customized for any desired spray pattern and water pressure.

Razor-Back® Belt Cleaner Video

Product Specifications

• Maximum Belt Speed – 1000 fpm (5.0 m/sec)
• Application – Coal Fired Power Plants, Hard Rock Mining, Steel Mills,
  Iron Ore, Aggregate and Mineral (Phosphate, Potash, Salt) Mining.

Available Tensioners

Spring-Shoc

Utilizes a unique patent pending mounting plate that allows
the cleaning blade to be spring tensioned in either a pull-up
or push-up position. This specially designed configurability
features two different mounting options that leave extra
clearance above or below the bracket where necessary.

Razor-Back® with Spray Bar

Razor-Back® with Spray Bar is a secondary belt cleaner that uses a row of spray nozzles to spray a fine sharp stream of water at a 30° degree angle onto the conveyor belt where the carry-back material is difficult to remove. Water is applied
to the belt in an overlapping spray pattern which places the particles into a fluid suspension, while moistening the belt.

The blades of the Razor-Back® with Spray Bar are then able to make consistent contact with the conveyor belt surface to remove nearly 98% or more of bulk material coarse carry-back.

Our Offer To You

Operating a bulk material handling plant is an expensive business made more difficult by excessive down time and costly maintenance. It is important that the best possible equipment and materials are used to minimise these difficulties which is where Hoverdale’s area of experience lays.

In every case, we enable customers to:

• Reduce downtime due to unscheduled break downs
• Save on equipment cost & renewal costs
• Save man hours on maintenance
• Minimising & eliminating lost production
• Increase their bottom line by achieving savings in all of the above

We would like to offer you a free site survey with a report and recommendations. We offer a pro rata payment plan where if you accept our recommendation you only pay the full price when we achieve our promised results. We can work with you to achieve the planned maintenance program by making components last longer by the strategic use of hard metals/ceramics.