BOOK A SITE VISIT NOW. THE SAVINGS WILL
MORE THAN PAY FOR YOUR TIME OR YOUR MONEY BACK.
CALL US ON +44 (0)116 284 1113
MORE THAN PAY FOR YOUR TIME OR YOUR MONEY BACK.
CALL US ON +44 (0)116 284 1113

©Copyright 2021 Hoverdale
The Retractable Razor-Back® secondary belt cleaning system can be accessed and removed from outside the chute without breaking the plane of the conveyor, resulting in decreased downtime and eliminating the need for confined space permits.
Mechanical Splices? No Problem. The Retractable Razor-Back® System with Split Block Spring-Shoc™ Tensioner can be installed on conveyor belts with mechanical splices, due to the passive wiping blade angle and impact-absorbing tensioning cushions, allowing the mechanical splices to pass without damaging the belt cleaner or the splice.
Razor-Back® with Spray Bar is a secondary belt cleaner that uses a row of spray nozzles to spray a fine sharp stream of water at a 30° degree angle onto the conveyor belt where the carry-back material is difficult to remove. Water is applied
to the belt in an overlapping spray pattern which places the particles into a fluid suspension, while moistening the belt.
The blades of the Razor-Back® with Spray Bar are then able to make consistent contact with the conveyor belt surface to remove nearly 98% or more of bulk material coarse carry-back.
Operating a bulk material handling plant is an expensive business made more difficult by excessive down time and costly maintenance. It is important that the best possible equipment and materials are used to minimise these difficulties which is where Hoverdale’s area of experience lays.
If you would like to take advantage of Hoverdale's 45 years of industry expertise, please call us on +44 (0)116 284 1113 or get in touch using the contact form below.
How we achieved a life increase of 20 times and eliminated build up & clogging on a waste management company's...”
How Hoverdale's Trackmaster troughing sets saved SCI Redcar £250,000 in replacement belts...”