ASGCO Slide-Ler

ASGCO Slide-ler™ give you the ability to change rolls under the conveyor loading skirt area without having to remove adjacent belt idlers. This allows the Slide-ler™ to fit into tight or confined spaces, ensuring proper belt rolling support and ease of change out.

ASGCO® Slide-ler™’  is a modular designed product that allows you to remove the
wing and center roll hangers for easy replacement of your idler rolls. It can also
be designed to hold any manufacturer roll in the industry. The Slide-Ler™ minimizes
down time and can be accessed from both sides of the conveyor system.

• MSHA approved for mine use – meets all requirements for flame resistant solid products taken into mines. Acceptance Marking No. MSHA IC -174/2
• Increase Productivity – by delivering increased traction between the conveyor belt and pulley, and increasing pulley life and reducing buildup.
• Improved Conveyor Belt Tracking – due to the Arrowhead patterns self-cleaning ability, which reduces material carry-back build up and thereby eliminates the major source of misalignment.
• Superior Wear – ability in abrasive or highly wet or dry applications as seen in below ground and above ground mining.
• Bonding Strength – that is superior to others, due to 3mm of our neoprene compound vulcanized into bottom-side of the lagging.
• Easy Installation – can be done in place, on plant site, at your local distributor or at the pulley manufacturer. Each roll is ½” or ¾” thick x 10” wide by 21.3’ long. 300’ (90m) long rolls will be available in January of 2006.